Brocade Network OS Message Reference v4.1.1 - Manual (Page 192)

176 Network OS Message Reference
53-1003227-01
FABS-1001
8
FABS Messages
FABS-1001
Message
<Function name> <Description of memory need>.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that the system is low on memory and cannot allocate more memory for new operations. This is
usually an internal Network OS problem or file corruption. The Description of memory need variable
specifies the memory size that was being requested. The value could be any whole number.
Recommended
Action
Reload or power cycle the switch.
FABS-1002
Message
<Function name> <Description of problem>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal problem has been detected by the software. This is usually an internal Network
OS problem or file corruption.
Recommended
Action
Reload or power cycle the switch.
If the message persists, execute the firmware download command to update the firmware.
FABS-1004
Message
<Function name and description of problem> process <Process ID number> (<Current
command name>) <Pending signal number>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an operation has been interrupted by a signal. This is usually an internal Network OS
problem or file corruption.
Recommended
Action
Reload or power cycle the switch.