Brocade Network OS Message Reference v4.1.1 - Manual (Page 274)

258 Network OS Message Reference
53-1003227-01
IGMP-1004
8
IGMP-1004
Message
IGMP maximum VLANs enabled. Cannot enable IGMP on <vlan>.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the number of VLANs on which Internet Group Multicast Protocol (IGMP) can be enabled
has reached the maximum limit. Therefore, IGMP cannot be enabled on the specified VLAN.
Recommended
Action
No action is required.
IGMP-1005
Message
IGMP snooping enabled on total <vlan> VLANs. Maximum limit reached.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the number of VLANs on which Internet Group Multicast Protocol (IGMP) can be enabled
has reached the maximum limit.
Recommended
Action
No action is required.
IGMP-1006
Message
IGMP snooping enabled on <vlan>.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the Internet Group Multicast Protocol (IGMP) is enabled on a particular VLAN.
Recommended
Action
No action is required.