Brocade Network OS Message Reference v4.1.1 - Manual (Page 283)

Network OS Message Reference 267
53-1003227-01
L2SS-1004
8
L2SS-1004
Message
FDB error: Error in creating the AVL tree.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the Layer 2 system (L2SYS) has encountered an error while initializing the AVL tree.
Recommended
Action
Reload or power cycle the switch.
L2SS-1005
Message
MAC-address-table hash failed even after two attempts for slot <slot> chip <chip>.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the Media Access Control (MAC) address table hash failed even after two hash changes
on the specified chip.
Recommended
Action
Reload or power cycle the switch.
L2SS-1006
Message
MAC-address-table is 95 percent full.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the Media Access Control (MAC) address table on the chip is 95 percent full.
Recommended
Action
Clear some of the entries using the clear mac-address-table dynamic command or wait until the old
entries age out.