Brocade Network OS Message Reference v4.1.1 - Manual (Page 381)

Network OS Message Reference 365
53-1003227-01
SEC-1037
8
SEC-1037
Message
Invalid WWN format <invalid WWN>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the World Wide Name (WWN) entered in the policy member list had an invalid format.
Recommended
Action
Execute the command again using the standard WWN format, that is, 16 hexadecimal digits grouped as
eight colon separated pairs. For example: 50:06:04:81:D6:F3:45:42.
SEC-1038
Message
Invalid domain <RBridge ID>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an invalid RBridge ID was entered.
Recommended
Action
Verify that the RBridge ID is correct. If RBridge ID is not correct, execute the command again using the
correct RBridge ID.
SEC-1044
Message
Duplicate member <member ID> in (<List>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified member is a duplicate in the input list. The list can be a policy list or a switch
member list.
Recommended
Action
Do not specify any duplicate members.
SEC-1071
Message
No new security policy data to apply.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that there are no changes in the defined security policy database to be activated.