Qosd-1501, Qosd-1502 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 363

Network OS Message Reference
347
53-1003227-01
QOSD-1501
8
QOSD-1501
Message
<BUM_protocol_name> traffic rate returned to conforming on interface
<interface_name>.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that broadcast, unknown unicast, and multicast (BUM) storm control has detected that the
traffic rate has returned to the normal limit on the specified interface.
Recommended
Action
No action is required.
QOSD-1502
Message
<BUM_protocol_name> traffic rate has been exceeded interface <interface_name>.
Interface will be shut down.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the broadcast, unknown unicast, and multicast (BUM) monitor routine has detected a rate
violation. The interface has been shut down.
Recommended
Action
Disable BUM storm control on the interface using the no storm-control ingress command; then
re-enable the interface (using the no shutdown command) and BUM storm control (using the
storm-control ingress command).