Brocade Network OS Message Reference v4.1.1 - Manual (Page 417)

Network OS Message Reference 401
53-1003227-01
SS-1010
8
SS-1010
Message
Copy support timeout multiplier is set to <Timeout Multiplier> due to higher CPU
load average. Copy support may take more time to complete.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the CPU load average is above normal. The copy support operation may take longer time
than usual.
Recommended
Action
No action is required.
SS-1011
Message
Copy support upload operation failed. Reason: <Failure reason>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a file copy error occurred during execution of the copy support command.
The file copy error can occur due to one of the following reasons:
• Could not connect to remote host
• Could not connect to remote host - timed out
• Transfer failed
•
Transfer failed - timed out
•
Directory change failed
•
Directory change failed - timed out
• Malformed URL
• Usage error
• Error in login configuration file
• Session initialization failed
•
Unknown remote host error
Recommended
Action
Check and correct the remote server settings and configuration and then execute the copy support
command again.
If the problem persists, contact your system administrator.