Fvcs-3008, Fvcs-3009, Fvcs-3010 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 220

204
Network OS Message Reference
53-1003227-01
FVCS-3008
8
FVCS-3008
Message
MAC (L2) database out of sync, Down-level domain <Domain>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the current media access control (MAC) count is not supported on the specified downlevel
domain.
Recommended
Action
Upgrade the firmware to Network OS v3.0.0 or later.
FVCS-3009
Message
Eth_ns buffer capacity exceeded - MAC or MCAST database may be out of sync.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the current media access control (MAC) count exceeds the supported limit.
Recommended
Action
Reduce the number of Ethernet devices in the fabric.
FVCS-3010
Message
Fab_STP Message Queue Overflow. Failed to send Update. MSTP may be out of sync.
Queue size = (<Queue Size>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the fab_stp (component of FVCS) that keeps MSTP in sync cannot send an update to the
remote RBridges because its internal message queue is full. This error is due to a temporary congestion
issue on the local RBridge.
Recommended
Action
The RBridge must leave and rejoin the fabric for synchronization of the spanning tree databases.