Brocade Network OS Message Reference v4.1.1 - Manual (Page 259)

Network OS Message Reference 243
53-1003227-01
HASM-1121
8
HASM-1121
Message
New version <firmware version string>.
Message Type
LOG | VCS
Severity
INFO
Probable Cause
Indicates the new firmware version string after firmware download.
Recommended
Action
No action is required.
HASM-1130
Message
The Ethernet PHY for slot <slot/partition> was reset successfully.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there was no Ethernet connection between the active management module and the
specified line card (LC). Subsequently, the PHY in the LC was reset automatically and the connection
has been recovered.
Recommended
Action
No action is required.
HASM-1131
Message
reset the Ethernet PHY for slot <slot/partition> (<error code>>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there was no Ethernet connection between the active management module and the
specified line card (LC). The active management module attempted to recover the connection by
resetting the PHY in the LC but failed.
Recommended
Action
Execute the copy support command and contact your switch service provider.