Dcm-3052, Dcm-4001, Dcm-4002 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 158

142
Network OS Message Reference
53-1003227-01
DCM-3052
8
DCM-3052
Message
Database Corruption was detected. Therefore, system was rebooted for recovery and
may have taken longer than usual.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the last system reload was for auto-recovery of database because the database corruption
was detected.
Recommended
Action
No action is required.
DCM-4001
Message
Database schema conversion succeeded.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that after a firmware download, the database schema was successfully converted to the
schema supported by the firmware.
Recommended
Action
No action is required.
DCM-4002
Message
Database schema conversion failed.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that after a firmware download, a failure was encountered in converting the database schema
to the schema supported by the firmware.
Recommended
Action
No action is required.