Udld-1003, Udld-1004, Udld-1005 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 455: Udld-1006

Network OS Message Reference
439
53-1003227-01
UDLD-1003
8
UDLD-1003
Message
UDLD Multiplier timeout has changed.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the UniDirectional Link Detection (UDLD) timeout multiplier value has been changed.
Recommended
Action
No action is required.
UDLD-1004
Message
UDLD is enabled on interface <InterfaceName>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the UniDirectional Link Detection (UDLD) protocol is enabled on the specified interface.
Recommended
Action
No action is required.
UDLD-1005
Message
UDLD is disabled on interface <InterfaceName>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the UniDirectional Link Detection (UDLD) protocol is disabled on the specified interface.
Recommended
Action
No action is required.
UDLD-1006
Message
Link status on interface <InterfaceName> is down. Unidirectional link detected.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified interface has been detected as a unidirectional link. The interface is blocked.