Brocade Network OS Message Reference v4.1.1 - Manual (Page 253)

Network OS Message Reference 237
53-1003227-01
HASM-1021
8
HASM-1021
Message
Firmware operation (<operation code>) was aborted manually.
Message Type
LOG | VCS
Severity
WARNING
Probable Cause
Indicates that the specified firmware operation was aborted manually.
Recommended
Action
No action is required.
HASM-1022
Message
Failed to fork firmware child process.
Message Type
LOG | VCS
Severity
WARNING
Probable Cause
Indicates that the firmware operation could not be started due to a software error.
Recommended
Action
Execute the copy support command and contact your switch service provider.
HASM-1023
Message
There is no HA connection between the MMs due to firmware incompatibility.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the firmware in the management modules are not compatible.
Recommended
Action
Upgrade the firmware on the standby management module to be the same as the active management
module.
HASM-1024
Message
Firmware is not available at <Firmware path on MM> on MM.
Message Type
LOG | VCS
Severity
WARNING
Probable Cause
Indicates that the firmware for the line card (LC) is not available in the management module compact
flash (CF) card. This event can be due to firmware corruption.