Brocade Network OS Message Reference v4.1.1 - Manual (Page 281)

Network OS Message Reference 265
53-1003227-01
L2AG-1008
8
Recommended
Action
No action is required. The Layer 2 Agent (L2AGT) will start learning the entries.
L2AG-1008
Message
MAC-address-table on slot <Slot_id> chip <Chip_id> is 95 percent full
[Dynamic/Static MAC's: <fdb_count>; ACL MAC's: <Acl_count>].
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the media access control (MAC) address table on the chip is 95 percent full.
Recommended
Action
Clear some of the entries using the clear mac-address-table dynamic command or wait until the old
entries age out.
L2AG-1009
Message
L2 H/W tables have reached capacity. Few ACL/MAC entries may not be configured in
H/W, resulting in flooding.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that some of the Layer 2 hardware tables are full.
Recommended
Action
Clear some of the entries using the clear mac-address-table dynamic command or wait until the old
entries age out.
L2AG-1010
Message
ERROR: Mac Vlan Classification table is Full. Add Failed for Vlan <ivid> Mac
<mac1>:<mac2>:<mac3>:<mac4>:<mac5>:<mac6> on <ifname>.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the Layer 2 classifier hardware table is full.
Recommended
Action
Remove the existing MAC VLAN entries and reconfigure.