Brocade Network OS Message Reference v4.1.1 - Manual (Page 243)

Network OS Message Reference 227
53-1003227-01
FW-3104
8
FW-3104
Message
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences crossed
lower threshold boundary to a value within the acceptable range.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent
fluctuations in CRC errors generally indicate an aging fabric. Check small form-factor pluggable (SFP)
transceivers, cables, and connections for faulty hardware. Verify that all optical hardware is clean.
FW-3105
Message
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has
dropped below upper threshold boundary to a value within the acceptable range.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent
fluctuations in CRC errors generally indicate an aging fabric. Check small form-factor pluggable (SFP)
transceivers, cables, and connections for faulty hardware. Verify that all optical hardware is clean.
FW-3107
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of Abnormal Frame termination frames that the port experiences has fallen
below the low boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of abnormal frame termination errors means the system is operating normally.