Brocade Network OS Message Reference v4.1.1 - Manual (Page 129)

Network OS Message Reference 113
53-1003227-01
BL-1038
8
BL-1038
Message
Inconsistent FPGA image version detected, reload the switch for recovery.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that the field-programmable gate array (FPGA) image version is incompatible with the software
version.
Recommended
Action
Reload the switch. If the message persists, replace the switch.
BL-1039
Message
Inconsistent FPGA image version detected, faulting the interface module in <slot
string>.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that the field-programmable gate array (FPGA) image version is incompatible with the software
version.
Recommended
Action
Power cycle the interface module using the power-off and power-on commands. If the message
persists, replace the interface module.
BL-1045
Message
mini SFP+ (SN: <mini SFP+ serial number>) is only supported in certain high port
count interface modules, not interface module in slot <slot number of interface
module that has the mini SFP+> with ID <Interface module ID of interface module
that has the mini SFP+ that does not support it>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the mini (form factor) enhanced small form-factor pluggable (SFP+) transceiver is
supported only by a certain type of interface module, but it can be inserted in other interface modules.
Recommended
Action
Replace the mini SFP+ transceiver with an SFP or SFP+ transceiver.