Brocade Network OS Message Reference v4.1.1 - Manual (Page 270)

254 Network OS Message Reference
53-1003227-01
HSL-1000
8
HSL Messages
HSL-1000
Message
HSL initialization failed.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates a hardware subsystem layer (HSL) initialization failure. This error is caused by other system
errors.
Recommended
Action
Execute the copy support command and contact your switch service provider.
HSL-1001
Message
Failed to acquire the system MAC address pool.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates the failure to acquire the system address. This error is caused by other system errors.
Recommended
Action
Execute the show logging raslog command to view the error log for other system errors and correct the
errors.
HSL-1004
Message
Incompatible SFP transceiver for interface <InterfaceName> is detected.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an incompatible small form-factor pluggable (SFP) transceiver for the interface has been
inserted.
Recommended
Action
Disable the interface using the shutdown command and insert an SFP transceiver that is supported on
the interface. After the SFP transceiver is inserted, re-enable the interface using the no shutdown
command.