Brocade Network OS Message Reference v4.1.1 - Manual (Page 308)

292 Network OS Message Reference
53-1003227-01
MSTP-1004
8
MSTP-1004
Message
Received BPDU on PortFast enable port. Shutting down Interface <message>
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that a port on which PortFast is enabled has received a bridge protocol data unit (BPDU). The
port has been disabled.
Recommended
Action
Disable the PortFast feature on the port using one of the following commands:
• For Rapid Spanning Tree Protocol (RSTP), execute the no spanning-tree edgeport command.
•
For Spanning Tree Protocol (STP), execute the no spanning-tree portfast command.
After disabling the PortFast feature, execute the no shutdown command to re-enable the port.
MSTP-2001
Message
<message>.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the Multiple Spanning Tree Protocol (MSTP) bridge mode has changed.
Recommended
Action
No action is required.
MSTP-2002
Message
<Bridge mode information>. My Bridge ID: <Bridge ID> Old Root: <Old Root ID> New
Root: <New Root ID>.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the Multiple Spanning Tree Protocol (MSTP) bridge or bridge instance root has been
changed.
Recommended
Action
No action is required.