Brocade Network OS Message Reference v4.1.1 - Manual (Page 299)

Network OS Message Reference 283
53-1003227-01
MCST-1004
8
MCST-1004
Message
NSM error: <op> (<reason>) for VLAN <vid> port <port>.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the multicast subsystem (mcast_ss) has encountered an error during a network service
module (NSM) event.
Recommended
Action
Reload or power cycle the switch.
MCST-1005
Message
Message error: Invalid message type <type> expecting <value1> or <value2> or
<value3>.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the type of the message received from the driver is invalid.
Recommended
Action
Reload or power cycle the switch.
MCST-1006
Message
Message error: <op> (<reason>)Invalid message length <length> expecting
<length1>.
Message Type
DCE
Severity
ERROR
Probable Cause
Indicates that the length of the message received from the driver is invalid.
Recommended
Action
Reload or power cycle the switch.