Brocade Network OS Message Reference v4.1.1 - Manual (Page 430)

414 Network OS Message Reference
53-1003227-01
SULB-1100
8
SULB Messages
SULB-1100
Message
Firmware <firmware operations: install, swap, reboot, commit, recover> begins on
<slot/partition>.
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
INFO
Probable Cause
Indicates that the specified firmware operation has started on the specified slot or partition.
Recommended
Action
No action is required.
SULB-1101
Message
Firmware <firmware operations: install, swap, reboot, commit, recover> ends on
<slot/partition>.
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
INFO
Probable Cause
Indicates that the specified firmware operation has completed successfully on the specified slot or
partition.
Recommended
Action
No action is required.
SULB-1102
Message
Firmware <firmware operations: install, swap, reboot, commit, recover> failed on
<slot/partition> with error (<error code>).
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
WARNING
Probable Cause
Indicates that the specified firmware operation has failed on the specified slot or partition. The error code
indicates the reason for the failure.