Brocade Network OS Message Reference v4.1.1 - Manual (Page 440)

424 Network OS Message Reference
53-1003227-01
SWCH-1004
8
SWCH-1004
Message
Interface module attach failed during recovery, disabling slot = <slot number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified interface module has failed during failover or recovery.
Recommended
Action
For a modular switch, execute the power-off and power-on commands to power cycle the interface
module.
For a compact switch, reload or power cycle the switch.
SWCH-1005
Message
Diag attach failed during recovery, disabling slot = <slot number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the diagnostic interface module attach operation has failed during failover or recovery.
Recommended
Action
For a modular switch, execute the power-off and power-on commands to power cycle the interface
module.
For a compact switch, reload or power cycle the switch.
SWCH-1007
Message
Switch port <port number> disabled due to \"<disable reason>\".
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the specified switch port is disabled due to the reason displayed in the message.
Recommended
Action
Take corrective action to restore the port based on the disable reason displayed in the message and then
execute the shutdown and no shutdown commands.