Brocade Network OS Message Reference v4.1.1 - Manual (Page 284)

268 Network OS Message Reference
53-1003227-01
L2SS-1007
8
L2SS-1007
Message
MAC-address-table on slot <Slot_id> chip <Chip_id> is less than 90 percent full.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that the Media Access Control (MAC) address table on the specified chip is less than 90
percent full.
Recommended
Action
No action is required. The Layer 2 system (L2SYS) will start learning the entries.
L2SS-1008
Message
Adding Internal MAC <mac1>:<mac2>:<mac3>:<mac4>:<mac5>:<mac6> VID <Vid> as a
static MAC.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that a static Media Access Control (MAC) is overriding an internal MAC entry (VRRP/SVI).
Recommended
Action
No action is required.
L2SS-1009
Message
Fabric-wide Layer 2 flush command issued.
Message Type
DCE
Severity
INFO
Probable Cause
Indicates that a fabric-wide Layer 2 flush command is issued and the entire Layer 2 forwarding table will
be cleared.
Recommended
Action
No action is required.