Brocade Network OS Message Reference v4.1.1 - Manual (Page 347)

Network OS Message Reference 331
53-1003227-01
PDM-1001
8
PDM Messages
PDM-1001
Message
Failed to parse the pdm config.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the parity data manager (PDM) process could not parse the configuration file. This may be
caused due to a missing configuration file during the installation.
Recommended
Action
Execute the firmware download command to reinstall the firmware.
If the message persists, execute the copy support command and contact your switch service provider.
PDM-1003
Message
pdm [-d] -S <service> -s <instance>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a syntax error occurred when trying to launch the parity data manager (PDM) process.
Recommended
Action
Execute the firmware download command to reinstall the firmware.
If the message persists, execute the copy support command and contact your switch service provider.
PDM-1004
Message
PDM memory shortage.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the parity data manager (PDM) process ran out of memory.
Recommended
Action
Restart or power cycle the switch.
If the message persists, execute the copy support command and contact your switch service provider.