Brocade Network OS Message Reference v4.1.1 - Manual (Page 186)

170 Network OS Message Reference
53-1003227-01
FABR-1005
8
Recommended
Action
If this message is due to a one time event because of the incoming data, the system will discard the
frame.
If the message persists, execute the copy support command and contact your switch service provider.
FABR-1005
Message
<command sent>: port <port number>: status 0x<reason for failure> (<description of
failure reason>) xid = 0x<exchange ID of command>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the application failed to send an async command for the specified port. The message
provides additional details regarding the reason for the failure and the exchange ID of the command. This
can happen if a port is about to go down.
Recommended
Action
No action is required. This message is often transitory.
If the message persists, execute the copy support command and contact your switch service provider.
FABR-1006
Message
Node free error, caller: <error description>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Network OS is trying to free or deallocate memory space that has already been
deallocated. This message is rare and usually indicates a problem with the Network OS.
Recommended
Action
If the message persists, execute the copy support command and contact your switch service provider.
FABR-1007
Message
IU free error, caller: <function attempting to de-allocate IU>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a failure occurred when deallocating an information unit (IU). This message is rare and
usually indicates a problem with the Network OS.
Recommended
Action
If the message persists, execute the copy support command and contact your switch service provider.