Brocade Network OS Message Reference v4.1.1 - Manual (Page 93)

Network OS Message Reference 77
53-1003227-01
Chapter
8
Network OS Messages
AG Messages
AG-1001
Message
N_Port ID virtualization (NPIV) is not supported by fabric port connected to port
<port>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the N_Port ID virtualization (NPIV) capability is not supported by the fabric port to which
the Access Gateway is connected.
Recommended
Action
• Some blades and ports in a switch may not support NPIV. NPIV functionality cannot be enabled on
such ports and they will not respond to NPIV requests.
• On non-Brocade switches, refer to the manufacturer's documentation to determine whether the
switch supports NPIV and how to enable NPIV on these types of switches.
AG-1004
Message
Invalid response to fabric login (FLOGI) request from the fabric for N_Port
<port>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the
specified N_Port.
Recommended
Action
Check the configuration of the fabric switch.
If the message persists, execute the copy support command and contact your switch service provider.