Brocade Network OS Message Reference v4.1.1 - Manual (Page 211)

Network OS Message Reference 195
53-1003227-01
FSS-1004
8
FSS-1004
Message
FSS out of memory (<memory allocation with number of bytes>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the system ran out of memory.
Recommended
Action
Check memory usage on the switch using the show process memory command.
Execute the copy support command and contact your switch service provider.
FSS-1005
Message
FSS read failure.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the read system call to the fabric synchronization service (FSS) device has failed.
Recommended
Action
If the message persists, execute the copy support command and contact your switch service provider.
FSS-1006
Message
No FSS message available.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that data is not available on the fabric synchronization service (FSS) device.
Recommended
Action
If the message persists, execute the copy support command and contact your switch service provider.