Sec-3045, Sec-3046, Sec-3049 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 396

380
Network OS Message Reference
53-1003227-01
SEC-3045
8
SEC-3045
Message
Zeroization has been executed on the system.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates that the system has been zeroized.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3046
Message
The FIPS Self Tests mode has been set to <Self Test Mode>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates that there was a change in the Federal Information Protection Standard (FIPS) self test mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3049
Message
Status of bootprom access is changed using prom-access disable CLI: <Access
Status>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates that the status of Boot PROM has changed using prom-access disable command. By default,
the Boot PROM is accessible.
Recommended
Action
No action is required.