Brocade Network OS Message Reference v4.1.1 - Manual (Page 416)

400 Network OS Message Reference
53-1003227-01
SS-1002
8
SS-1002
Message
Copy support has stored support information to the USB storage device.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the copy support command was used to transfer support information to an attached USB
storage device.
Recommended
Action
No action is required.
SS-1003
Message
Copy support operation to USB storage device aborted.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a USB operation error occurred during execution of the copy support command.
Complete error information cannot always be displayed in this message because of possible errors in
subcommands being executed by the copy support command.
Recommended
Action
Make sure that the attached USB device is enabled.
Execute the usb on command to enable an attached USB device. After the USB problem is corrected,
execute the copy support command again.
SS-1004
Message
One or more modules timed out during copy support. Retry copy support with timeout
option to collect all modules.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates timeout in modules during execution of the copy support command.
Recommended
Action
Execute the copy support command again.