Bosch 8-Dec - Manual (Page 136)

128 | Arming Devices | LSN
SE 220 LSNi SmartKey
Arming Device
Features
▶ SmartKey code keypad can be used as a "coded arming
device" with integrated reader
▶ Code keypads can be used as a "coded arming device"
in conjunction with the reader
▶ Simple, non-contact operation
▶ High security through “Challenge & Response”
procedure
▶ Clear signaling prevents operational errors
▶ No manipulation or tampering possible
▶ Detailed logging of arming via the LSN control panel
▶ The arming device is programmable via the control
panel
▶ Motorized block locking function: All blocking
elements for an area are engaged and disengaged
simultaneously.
▶ Suitable for various types of doors
The SE 220 LSNi SmartKey arming device with connectable
code keypad/reader is a system solution for arming/
disarming intrusion alarm systems.
Arming/disarming is carried out by using the SmartKey key
then entering the user code.
The arming device meets BSI requirements.
System Overview
1 SPE blocking element
2 SE 220 LSNi control unit
3 Bolt contact
4 SmartKey keys
5 Code keypad with integrated reader
6 Reader
7 Code keypad
8 LSN control panel
Functions
Individual system components can be put together
depending on the usage conditions required. Operation
modes with or without the SPE blocking element are
possible.
The SE 220 LSNi control unit processes the status reports
of all components in the system, communicates these
reports to the intrusion alarm system and controls the SPE
blocking element. The control unit has a connection line for
connecting bolt contacts and two primary lines. The control
unit is mounted in the secure area.
SmartKey code keypad with integrated reader
The SmartKey code keypad with integrated reader
combines the function of the reader and the SmartKey code
keypad in one unit. Initial set-up and operation is the same
as with one reader + one code keypad.
The reader for the SmartKey key is located in the middle of
the unit (not visible from the outside). To operate, you hold
the SmartKey key in the middle of the SmartKey code
keypad (with integrated reader) at a maximum distance of
2 cm. The code keypad with integrated reader allows
arming and disarming of the intrusion alarm system only
after the correct combination of numbers has been entered
at the code keypad.
Arming/disarming is carried out by using the SmartKey key
then entering the user code.
Bosch Security Systems B.V. www.boschsecurity.com
4