Bosch 8-Dec - Manual (Page 21)

Control Panels, Control Centers, and Keypads | Easy Series | 13
Transmission of own events
If necessary, the device can transmit test calls and fault/
restoration of telephone line as an SMS message.
Programming
Programming is carried out with a cell phone via entries on
the SIM card. In transparent transmission, no programming
is necessary for standard applications. Remote
programming is possible with a cell phone via SMS
messages.
Display
The device has an LED display for device status, GSM field
strength and active GSM transmission.
Certifications and Approvals
Region Certification
Europe CE
Country Approval ITS-300GSM Communicator
Installation/Configuration Notes
There must be sufficient GSM field strength at the antenna
location. The ITS-300GSM supports SIM cards with a
deactivated or default PIN.
Transparent transmis-
sion SMS transmission
SIM card required Voice card Data card (SMS)
Formats
supported
Audio, transmission for-
mats of the control panel
(contact ID or DTMF-
based formats recom-
mended)
Contact ID
Alarm receiver Standard receiver for
telephone network (e.g.
D6600)
Special SMS receiver
Parts Included
Type Number Component
ITS-300GSM 1 ITS-300GSM module with mounting
frame, antenna, pre-assembled cable
Technical Specifications
Telephone line fault output Normally closed
Telephone line fault limit value 3.5 V
Telephone network connection RJ-11 socket or screw terminal
Supported GSM networks 800/900/1800 MHz
Power supply Connection to control panel battery
Power intake Standby: 30 mA; GSM transmission
350 mA
Voltage range 10 to 14 V DC
Dimensions 12.5 x 7 cm
Ordering Information
ITS-300GSM Communicator
For backup transmission from a control panel's
telephone dialer over the GSM network, if tel-
ephone line transmission is not working. Trans-
mits reports and voice. Compatible with con-
trol panels from different manufacturers.
ITS-300GSM
www.boschsecurity.com Bosch Security Systems B.V.
1