Bosch 8-Dec - Manual (Page 253)

Detectors and Accessories | Magnetic Contacts Recessed Mount | 245
ISN‑CTAP‑10 Contacts
(9.5 mm)
Features
▶ Closed loop
▶ Includes a magnet
The contacts are available in brown or white. All models
include a magnet and have a 9.5 mm (0.375 in.) diameter.
Note The photograph shows model ISN-CTAP-10W.
Certifications and Approvals
UL and X
Region Certification
Europe CE 73/23/EEC and 93/68/EEC, EN50131:
1997, EN50131-6: 1997, EN60950:
2000, EN60335-1: 1994 +A1: 1996
Annex B
Installation/Configuration Notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts Included
Quantity Per Package Component
10 Contacts
10 Magnets
Technical Specifications
Specifications for All Models
Gap Width: 19 mm (0.75 in.)
Contact Dimensions: 9.5 mm x 31.75 mm
(0.375 in. x 1.25 in.)
Wire Lead Type: 0.8 mm (0.029 in.) 22 AWG,
7 stranded
Wire Lead Length: 46 cm (18 in.) standard leads
Switch Configuration Type: Single pole single throw (SPST)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance: 10 10 Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage: 100 V
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to -140°F)
Specifications for Flange ISN-CTAP-FMB/W Models
Flange Dimensions (L x W): 14.2 mm x 19.1 mm
(0.562 in. x 0.750 in.)
Package Information
ATTENTION! Each package contains ten contacts and ten magnets.
Ordering Information
Brown Contact with Flat Magnet
Brown recessed contact with
9.5 mm (0.375 in.) diameter. Includes a flat
magnet. Package contains ten contacts and
ten magnets.
ISN-CTAP-10FB
White Contact with Flat Magnet
White recessed contact with
9.5 mm (0.375 in.) diameter. Includes a flat
magnet. Package contains ten contacts and
ten magnets.
ISN-CTAP-10FW
Brown Contact with Standard Magnet
Brown recessed contact with
9.5 mm (0.375 in.) diameter. Includes a stand-
ard magnet. Package contains ten contacts
and ten magnets.
ISN-CTAP-10B
White Contact with Standard Magnet
White recessed contact with
9.5 mm (0.375 in.) diameter. Includes a stand-
ard magnet. Package contains ten contacts
and ten magnets.
ISN-CTAP-10W
Brown Flange Contact with Standard
Magnet
Brown recessed contact with
9.5 mm (0.375 in.) diameter and flange de-
sign. Includes a standard magnet. Package
contains ten contacts and ten magnets.
ISN-CTAP-FMB
www.boschsecurity.com Bosch Security Systems B.V.
5