Bosch 8-Dec - Manual (Page 279)

Detectors and Accessories | Magnetic Contacts Surface Mount | 271
ISN‑CSS‑40 Super Stick
Contacts with Side Leads
Features
▶ Closed loop
▶ Special super stick adhesive does not fall off, dry off,
or freeze off
▶ Side leads
The contacts are available in brown or white. Both models
have a strong adhesive surface. Both models have leads that
come from the side of the contact.
Certifications and Approvals
UL and X
Installation/Configuration Notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts Included
Quantity Per Package Component
10 Contacts
10 Magnets
Technical Specifications
Specifications for All Models
Gap Width: 19 mm (0.75 in.)
Contact Dimensions: 7.8 mm x 35.56 mm x 7.8 mm (0.31
in. x 1.4 in. x 0.31 in.)
Wire Lead Type: 0.8 mm (0.029 in.) 22 AWG,
7 stranded
Wire Lead Length: 46 cm (18 in.)
Switch Configuration Type: Single pole single throw (SPST)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance: 10 10 Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage: 100 V
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to -140°F)
Package Information
ATTENTION! Each package contains ten contacts and ten magnets.
Ordering Information
Brown Super Stick Contact with Side Leads
Brown surface mount contact. Includes a
standard magnet. Package contains ten con-
tacts and ten magnets.
ISN-CSS-40B
White Super Stick Contact with Side Leads
White surface mount contact. Includes a stand-
ard magnet. Package contains ten contacts
and ten magnets.
ISN-CSS-40W
www.boschsecurity.com Bosch Security Systems B.V.
5