Bosch 8-Dec - Manual (Page 57)

Control Panels, Control Centers, and Keypads | 7000 Line | 49
DS7446KP Series
LCD Keypads
Features
▶ Contemporary vertical design
▶ Flip door that covers or uncovers the illuminated keys
▶ Area indicator
▶ Adjustable volume
▶ Programmable emergency keys
The DS7446KP is a four-wire alphanumeric liquid crystal
display (LCD) keypad that works with DS7200 Series
Control Panels. It supports all system functions. The keypad
is required for programming the control panel locally.
Functions
Contemporary Design
The compact vertical design uses less wall space and blends
well into surroundings. Close the flip door to protect the
keys from dirt and damage, and to conceal the illumination.
Area Indicator
The keypad display can show area icons. The state of the
icon (on, fast flash, slow flash, or off) indicates information
about an area such as: the area is armed, the area is in
alarm, the area has a zone trouble condition, or the area is
disarmed. The keypad display can also show the area it is
currently assigned to if the keypad is outside its home area.
Indicators and Tones
The keypad display has four light emitting diodes (LEDs)
across the faceplate to indicate the status for perimeter,
power, arming, and command. The keypad can emit eight
tones to indicate a situation such as an alarm, trouble, error,
or entry delay.
Programmable Keys
Each DS7446KP Keypad model has 19 illuminated keys for
specific functions. Your installing company can program the
[A], [B], and [C] keys with functions such as Emergency,
Fire, or Panic. When pressed, each key emits a muted beep.
Adjustable Volume
You can adjust the keypad volume. When the sounder is
active, pressing any key on the keypad momentarily silences
the sounder.
Certifications and Approvals
X
Built to comply with EN50131 Grades 1, 2, and 3
Installation/Configuration Notes
Compatibility Information
The DS7446KP Keypad works with the DS7200 Series
Control Panels.
Wiring Considerations
Wire Type Keypad Distance from Control Panel
Unshielded, 0.8 mm (#22 AWG) Up to 305 m (1000 ft)
Unshielded, 1.2 mm (#18 AWG) Up to 610 m (2000 ft)
Parts Included
Quantity Component
1 Keypad
1 Wall tamper spring
Technical Specifications
Environmental Considerations
Relative Humidity 80% at 40°C (100°F), non-condens-
ing
Temperature (Operating: +5°C to +40°C (40°F to 100°F)
Temperature (Storage): -10°C to +55°C (14°F to 130°F)
Power Requirements
Current (Standby): 35 mA
Current (Alarm): 100 mA
Voltage (Operating): 10.2 VDC
Product Characteristics
Dimensions: 13.7 cm x 7.6 cm x 2.4 cm
(5 in. x 3 in. x 1 in.)
Weight: 0.168 kg (0.37 lb)
www.boschsecurity.com Bosch Security Systems B.V.
1