Bosch 8-Dec - Manual (Page 195)

Detectors and Accessories | Motion Ceiling Mount | 187
Technical Specifications
Enclosure Design
Material: High impact ABS plastic enclosure
Dimensions: 3.05 cm x 11.7 cm (1.2 in. x 4.6 in.)
Environmental Considerations
Operating Temperature: -29°C to +49°C (-20°F to +120°F)
For UL Certificated installations, 0°C to +49°C
(+32°F to +120°F)
Radio Frequency Interfer-
ence (RFI) Immunity:
No alarm or setup on critical frequencies in the
range from 26 MHz to 950 MHz at 50 V/m.
DS936: Complies with Environmental Class II
(EN50130-5)
Mounting
Height Range: 2 m to 3.6 m (7 ft to 12 ft)
Location: Surface or semi-flush on ceiling or on standard 10 cm (4
in.) octagonal electrical box
Pattern Pointabil-
ity:
±15° rotational
Outputs
Alarm: Normally-closed reed relay rated at 3.0 W, 125 mA at 28 VDC
for resistive loads and protected by a 4.7 Ω resistor in the com-
mon C leg.
Tamper: Normally-closed cover activated tamper switch with separate
terminals. Tamper contacts rated 125 mA at 28 VDC maximum.
Power Requirements
Current: 20 mA at 12 VDC
Voltage: 10 VDC to 15 VDC
Ordering Information
DS936 Low Profile Panoramic PIR Detector
Provides enhanced signal processing, 360° x
7.5 m (24 ft) pattern, mounts to surfaces, or
mounts semi-flush into a ceiling.
DS936
DS936-FRA Low Profile Panoramic PIR
Detector
For use in France. Provides enhanced signal
processing, 360° x 7.5 m (24 ft) pattern,
mounts to surfaces, or mounts semi-flush into
a ceiling.
DS936-FRA
www.boschsecurity.com Bosch Security Systems B.V.
5