Bosch 8-Dec - Manual (Page 323)

LSN Peripherals | LSN Motion PIR/Microwave | 315
The installation bracket (optional) can be used to swivel the
detector around by +/-45° and to tilt it by +10°/-15° (not
VdS compliant!).
Note Do not remove the circuit board in the
detector. Risk of damage!
Installation height
Y Range y: central long-range zone
X Range x: lateral long-range zone
Wide-angle version
•
Greatest possible monitoring density by closely-spaced
chessboard-type mirror with 16 zones and a 15 m range.
•
In the case of perpendicular (standard) installation, the
inclination of the central long-range zone is 5.5°, the
range is 15 m, and the lateral long-range zone is 12 m.
•
In the case of installation with a 3° incline, the lateral
long-range zone is inclined to 8.5°, the range 13 m, and
the lateral long-range zone is 11 m. This means the zone
configuration can be adjusted to match the spatial
conditions.
Side view
Plan view
X: range of the lateral long-range zone
Y: range of the central long-range zone
Long-range version with IRS 162 (optional)
•
Long-range version by changing the IRS 162 long-range
mirror (optional)
• 11 zones give a closed, long-range detection zone of up
to 25 m
•
Monitoring area cannot be bypassed due to overlapping
operating zone distribution
1 Non-monitored surface
1 Installation height
2 Side view
3 Top view
4 The distance from the side to the wall depends on the range
www.boschsecurity.com Bosch Security Systems B.V.
6