Bosch 8-Dec - Manual (Page 394)

386 | Conettix - Information Transport Solutions | Conettix - Receiver/Gateway
Conettix D6600 Communi-
cations Receiver/Gateway
Features
▶ 32 lines for public switched telephone network (PSTN)
communications
▶ Up to 3200 accounts for local-area network (LAN) or
wide-area network (WAN) communications
▶ Telephone line terminator cards for isolation and
transient suppression
▶ Front panel access to CPU card and hot-swappable line
cards
▶ Supports one Conettix D6690 SAFECOM Line Card for
long-range radio system capability
▶ Two-way audio
▶ Caller ID, ANI, and DNIS
▶ NIST AES Certification for Network Communications
▶ Supports 128-bit AES Rijndael encryption
The Conettix D6600 Communications Receiver/Gateway
with Conettix IP hardware components works in the
following configurations:
•
Telephone line communications over the public
switched telephone network (PSTN).
•
Internet or intranet communications over a LAN or WAN
using standard user datagram protocol and internet
protocol (UDP/IP).
•
Simultaneous PSTN and LAN or WAN communications.
The network environment reduces signal-reporting time and
provides instant notification when a site experiences
communication problems. A D6600 with Conettix IP
hardware is compatible with most manufacturer’s fire and
security system control panels. With Bosch Security
Systems’ control panels, high speed remote programming
over the network is also possible.
System Overview
PSTN Communications Configuration
This configuration uses existing telephone lines. A control
panel's signal transmits over a PSTN analog telephone line
to the D6600. The D6600 translates the signal to a common
data format and sends the signal through Ethernet LAN,
WAN, or RS-232 to a central station automation system.
Internet or Intranet Communications Configuration
This configuration requires Conettix IP hardware
components, uses existing Internet or intranet structures,
and avoids additional telephone service costs.
This configuration permits the Conettix D6200
Programming/Administration Software to connect to the
D6600 remotely. A control panel's signal transmits over the
LAN or WAN to the D6600. The D6600 translates the signal
to a common data format and sends the signal through
Ethernet LAN, WAN, or RS-232 to a central station
automation system. The central automation system sends
information to operator workstations.
Conettix D6200 Programming/Administration Software
Conettix D6200 Programming/Administration Software is a
PC-based application that allows users to view, change,
upload, and download D6600 programming parameters
through a network connection or RS-232 serial port.
Through the Conettix D6200 Programming/Administration
Software users can edit CPU and line card parameters; view
the status of all accounts in the databases; add, edit, and
delete accounts; and configure network operations.
Note Conettix D6200 Programming/Administration
Software works with the following operating
systems and associated service packs:
Microsoft
® Windows ® 98, Windows 98 Second
Edition, Windows Me, Windows NT ® , Windows
2000, and Windows XP.
Bosch Security Systems B.V. www.boschsecurity.com
7