Rf3227e rf receiver (433.42 mhz) – Bosch 8-Dec User Manual

Page 474

Advertising
background image

466 | DSRF Premises Wireless | Bosch DSRF Receivers

RF3227E RF Receiver

(433.42 MHz)

Features

Receives low battery, tamper, and sensor status

reports

LED indicates receiver status
Cover, wall, and antenna tamper
System allows two receivers for larger area coverage
Supervisory interval programmable through the

control panel

4-hour smoke detector supervision

The RF3227E RF Receiver allows the option bus of
compatible control panels to receive RF signals from up to
96 wireless devices. The RF3227E supports up to eight
keypads and 96 key fobs or input sensors.
Tamper, jam detection, and sensor missing status reports
provide reassurance that the system works correctly.
The RF3227E receives at 433.42 MHz.

Certifications and Approvals

Region

Certification

Europe

CE

1999/5/EC, 2006/95/EC, 2004/108/
EC; EN 55022:2006 + A1:2007, Class B;
EN 50130-4 w/A1:1998 + A2:2003;
EN61000-3-2:2006;
EN61000-3-3:1995; EN 60950-1:2001;
TBR21:1998

Installation/Configuration Notes

Compatibility Information
The following products are compatible with the RF3227E
Receiver:

Category

Product ID

Product Description

Control

CC7240‑A

Solution 40 Control Panel

Panels

DS7000 Series

DS7240V2 Control Panel and

DS7220V2 Control Panel

Detectors

RF280ETHS

Wireless smoke detector

RF835E

Wireless TriTech® detector

RF940E

Wireless PIR detector

RF1100E

Wireless glass-break detector

RF3401E

Wireless point transmitter

RF3405E

Wireless inertia transmitter

Keypads

RF3332E

Two‑button key fob

and fobs

RF3334E

Four‑button key fob

RF3501E

One‑button panic key fob

RF3501LE

One‑button panic key fob

RF3503E

Two‑button transmitter

Mounting Considerations
Whenever possible, mount the receiver in a central location
in regard to all wireless sensors. The receiver should be
mounted vertically with at least 25 cm (9.8 in.) clearance
above it for the antennas. Avoid mounting the receiver in
areas with moisture and significant metal or electric wiring,
such as furnace rooms and utility rooms. If this is
unavoidable, mount the receiver with the antennas
extending above any metal surface.
Wiring
The wire length between the receiver and the control panel
must not exceed 300 m (984 ft). Use solid wire with a
minimum diameter of 0.8 mm or stranded wire with a
minimum diameter of 1.0 mm. Adding additional devices to
the bus may reduce the maximum wire length.

Note

Do not use twisted pair wire or shielded cable.

Parts Included

Quant.

Component

1

RF3227E Receiver

1

433.42 MHz antenna

1

Hardware pack

1

Literature pack

Technical Specifications

Environmental Considerations

Temperature (0perating):

0°C to +65°C

Mechanical Properties

Dimensions including anten-

na:

25.6 cm x 15.2 cm x 3.0 cm

Bosch Security Systems B.V.

www.boschsecurity.com

9

Advertising