Bosch 8-Dec - Manual (Page 55)

Control Panels, Control Centers, and Keypads | 7000 Line | 47
Octal Relay Modules
The DS7400Xi Series Control Panels support up to two
DX3010 Octo-Output Expander Modules. Each module
supplies eight relay or solid state outputs to follow system
events or to follow programmed Output Functions from the
control panel.
Output Functions
Program the output functions to follow system events or to
follow one or two specific zones in a cross matrix (see Input
and Output Cross Matrix). Output functions can control
octal relay outputs or addressable bus outputs.
Programmable from Keypad or Remotely
•
The system is completely keypad programmable. No
need for expensive handheld programmers.
•
RPS-INTL provides remotely programming through an
IBM
® PC (or IBM compatible) running a Microsoft ®
Windows ® operating system and communicating
through a standard Hayes modem. Using an off-site
computer to run diagnostics, arm systems, and bypass
zones reduces service visits to a premise and provides
quick customer assistance.
Smoke Detector Alarm Verification
The DS7400Xi Series Control Panels can automatically reset
the smoke detectors following an alarm. If a second alarm
occurs within the verification window, an immediate fire
alarm occurs, reducing potential false alarms while
providing fast response to an alarm.
Two Independent Entry Delays
Program zones to select from one of the two entry delay
times. Users can select a longer entry delay time for zones
located a long distance from the keypad.
Certifications and Approvals
Region Certification
Europe CE 1999/5/EC, EN60950 Dec 1992 (2nd
edition) +A1: 1992 +A2: 1993,
EN50081-1: 1992, EN50082-1: 1992
Belgium INCERT B-509-0003/a Jan 2004
Sweden INTYG DS7400Xi16 only: Nr04-755
Nr04-630
Installation/Configuration Notes
Compatible Products
Category Product
Keypads DS7445Vi LED Keypad
DS7445V2 LED Keypad
DS7447E LCD Keypad
DS7447V2 LCD Keypad
Modules Conettix IP C900V2 Dialer Capture Module
C900TTL-E Dialer Capture Module
Conettix IP DX4020 Network Interface Module
Door Access Control Module (DACM)
Category Product
DS7420i Dual Phone Line/Bell Supervision Module
DS7430 Multiplex Bus Driver Module
DS7432/E Eight-Input Remote Module
DS7433/E Eight-Input Direct Module
DS7436 Addressable Expansion Module
DS7457i/iF Single-Zone Input Module
DS7457iE Single-Zone Input Module
DS7460i Double-Input Module
DS7461i Single-Input Module
DS7465i Input/Output Module
DS7480 Bell Supervision Module
DS7481 Single Phone Line Monitor
DS7489 Solid State Output Module
DX3010 Octo-output Expander
DX4010i RS-232 Serial Interface Module
Multiplex Detec-
tors
D7050/TH Multiplex Photoelectric Smoke Detector
MX250/TH Multiplex Photoelectric Smoke Detector
MX775i Multiplex PIR Intrusion Detector
MX794i Long-Range Multiplex PIR Detector
MX934i Multiplex PIR Intrusion Detector
MX938i Multiplex Intrusion Ceiling Mount Detector
Intrusion Detec-
tors
All conventional Bosch intrusion detectors, including
Blue Line, seismic, PIR, TriTech, photoelectric, and Tri-
Tech PIR Microwave.
Two-wire and Four-
wire Smoke Detec-
tors
1
Conventional Bosch 12 V smoke, heat, and photoelec-
tric smoke detectors.
1 Availability varies according to sales regions.
Wiring
Use four-conductor 1.2 mm to 0.8 mm (18 AWG to 22 AWG)
cable. The maximum wire length of each sensor loop is
305 m (1000 ft). The maximum multiplex bus wire length
per system is 610 m (2000 ft) if using 0.8 mm (#22 AWG)
wire or 1525 m (5000 ft) if using 1.0 mm (#18 AWG) wire.
Keypads
No more than two keypads per 305 m (1000 ft) run with a
total of no more than 15 keypads in the system.
Technical Specifications
Burglar and Fire Zone Inputs
Number of Circuits: 8 circuits on board
End of Line Resistor: 2.2 + 1.5 kΩ
Environmental Considerations
Operating Temperature: 0°C to +49°C
(+32°F to +120°F)
www.boschsecurity.com Bosch Security Systems B.V.
1