Emk 36 s lsn built-in magnetic contact – Bosch 8-Dec User Manual

Page 355

Advertising
background image

LSN Peripherals | LSN Magnetic Contacts | 347

EMK 36 S LSN Built-In

Magnetic Contact

Features

LSN flush-mount magnetic contact
VdS class C
Tamper switch
Head-on mounting
LSN perimeter protection

Magnetic contacts are used for tear-off surveillance of
doors and windows.

Certifications and Approvals

Region

Certification

Europe

CE

EMK 36 S LSN

Germany

VdS

G 101007, C EMK 36 S LSN

Installation/Configuration Notes

Installation notes

Installation of the EMK 36 S LSN is head-on.

Installation can be completed with or without a plastic

sleeve. If no plastic sleeve is used, the components

should be fixed in the bores.

Installation in ferromagnetic materials is not

permissible for either the contact or the magnets.

The contacts are generally installed in the door or

window frames with the magnet in the window or in the

door. If the door or window is opened less than 1 cm,

the magnetic contact should not be able to detect this.

An opening of more than 3 cm must be detected.

1

Contact

2

Magnet

Distances diagram

1

Extraction

2

Proximity switch part

Note: If the attached magnets are touching each other, there will

be no tamper zone!

Connecting LSN contacts

Each LSN contact is a physical LSN element (1 out of

127 possible per loop).

The length of LSN contact connection cables must be

included when planning the total line length of the LSN

loop, as LSN technology is incorporated in these

detectors.

Passive coupling elements for joining the connection

cables to the installation cable must be placed as close

as possible to the LSN contacts. The 1 m connection

cable with 2 m LSN cable length is included in the

calculation of the LSN cable length (LSN is carried into

the contacts and back out again).

Connector boxes (optional) are classified as installation

material.

Testing LSN contacts

Reed switch and microswitch functions can be checked

before installation by a high-Ohm multimeter or

continuity checker (for diode paths).

The resistance values are approximate values; a large

change in resistance is significant here.

www.boschsecurity.com

Bosch Security Systems B.V.

6

Advertising