Bosch 8-Dec - Manual (Page 219)

Detectors and Accessories | Request-to-Exit | 211
DS150i Series Request-to-
exit Detectors
Features
▶ Single or double door use
▶ Wall or ceiling mountable
▶ Internal vertical pointability
▶ Wrap-around coverage pattern
▶ Selectable relay trigger mode
▶ Selectable fail safe/fail secure modes
The DS150i Series consists of the DS150i Detector (light
gray) and the DS151i Detector (black). They are specifically
designed for Request-to-exit (REX) applications. The
DS150i and DS151i detect motion in their coverage area
and signal an access control system or door control device.
Functions
Test Features
Externally visible activation LED.
Certifications and Approvals
Region Certification
Europe CE 89/336/EEC, EN55022: 1998 +A1: 2000
+A2: 2003, EN50130-4: 1996 +A1: 1998
+A2: 2003, EN61000-4-2: 1995 +A1:
1998 +A2: 2001, EN61000-4-3: 2002
+A1: 2003, EN61000-4-4: 1995 +A1:
2000 +A2: 2001, EN61000-4-5: 1995
+A1: 2001, EN61000-4-6: 1996 +A1:
2001 +A2: 2001, EN61000-4-11:1994
+A1: 2001, EN60950-1: 2001
USA UL ALVY: Access Control Systems Units
(UL294)
Installation/Configuration Notes
Front View and Top Views
A front view of the DS150i and DS151i coverage, as well as
top views of the coverage pattern on the floor. The typical
coverage measurements are 2.4 m x 3 m (8 ft x 10 ft).
www.boschsecurity.com Bosch Security Systems B.V.
5