Bosch 8-Dec - Manual (Page 145)

Detectors and Accessories | Motion PIR | 137
Solid State Relays
Solid state relays send silent alarm output signals to
provide a higher level of security and reliability. An external
magnet does not activate the relay. The solid state relay
uses less current than a mechanical relay, providing longer
standby capacity during a power loss.
Draft, Insect, and Small Animal Immunity
The sealed optic chamber provides immunity to drafts and
insects, reducing false alarms. Small animal immunity
reduces false alarms caused by animals less than 4.5 kg
(10 lb), such as rodents.
Remote Self Test
A remote self test initiates when the walk test input
switches to its true state. The alarm relay and alarm LED
activate for four seconds following a successful test. The
trouble relay activates, and the alarm LED flashes following
a failed test.
Input Power Supervision
When the power is lower than 8 V, a low input power trouble
condition activates the trouble relay and causes the LED to
flash. The trouble condition clears automatically when
power reaches or exceeds 8 V.
DIP Switch Programming
The following functions are all programmed using DIP
switch settings:
• Remote Walk Test LED
•
Long and Short Range Select
Trouble Memory
When the walk test input switches to its true state for less
than two seconds, the LED flashes to indicate the most
recent trouble condition. If there is no trouble in memory,
the LED does not flash. After twelve hours, or after the
detector receives a second walk test pulse for two seconds
or less, the LED stops flashing and the trouble memory
clears.
Certifications and Approvals
Region Certification
Europe CE 89/336/EEC, EN55022: 1998 +A2: 2003
(CISPR 22: 1997), EN50130-4: 1995
+A2: 2003, EN61000-4-2: 1995 +A2:
2001, EN61000-4-3: 1996 +A1: 2002,
EN61000-4-4: 1995 +A2: 2001,
EN61000-4-5: 1995 +A1: 2001,
EN61000-4-6: 2003, EN61000-4-11:
1994 +A1: 2001, EN60950-1: 2001 1st
edition
EN50131 Tested to EN 50131-1 Grade 2, TS
50131-2-2 August 2004, EN 50130-4, EN
50130-5
Belgium INCERT B-509-0051
Poland TECHOM 128/06
Region Certification
USA UL ANSR: Intrusion Detection Units (UL639),
ANSR7: Intrusion Detection Units Certified
for Canada (cULus)
Italy IMQ
France AFNOR Type 2 (*), NF et A2P (NF 324 - H 58)
China CCC 2007031901000293
Sweden INTYG Nr07-168
the
Netherlands REQ 07223000/AA/00
The detector is also designed to comply with following standards and ap-
provals.
Australia
C-Tick
Germany VdS
Schaden-
verhütung
GmbH
G107504, Class B
Norway FGI D‑169/07, D‑620/07
Installation/Configuration Notes
Long-range Coverage: 16 m x 21 m (50 ft x 70 ft)
www.boschsecurity.com Bosch Security Systems B.V.
5