Bosch 8-Dec - Manual (Page 283)

Detectors and Accessories | Magnetic Contacts Surface Mount | 275
ISN‑CMET‑4418 Overhead
Door Contact
Features
▶ Closed loop
▶ Pin holds armored cable firmly in place
▶ Includes adjustable magnetic assembly bracket
▶ Ten installation options for the magnet
The contact is available in a metal finish. It uses epoxy and
a special push-pin to hold the armored cable firmly in place.
Certifications and Approvals
UL and X
Region Certification
Europe CE 73/23/EEC and 93/68/EEC, EN50131:
1997, EN50131-6: 1997, EN60950:
2000, EN60335-1: 1994 +A1: 1996
Annex B
Installation/Configuration Notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts Included
Quantity Per Package Component
1 Assembly (contact, epoxy, push-pin, and brack-
et)
1 Magnet
Technical Specifications
Gap Width: 50.8 mm (2 in.)
Contact Dimensions: 107 mm x 50.8 mm x 12 mm
(4 in. x 2 in. x 0.47 in.)
Cable Length: 46 cm (18 in.)
Switch Configuration Type: Single pole single throw (SPST)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance:
10 10 Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage:
100 V
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to -140°F)
Package Information
ATTENTION! Each package contains one assembly with contact, epoxy,
push-pin, bracket, and one magnet.
Ordering Information
ISN‑CMET‑4418 Overhead Door Contact
Package contains one assembly with contact,
epoxy, push-pin, bracket, and one magnet.
ISN-CMET-4418
www.boschsecurity.com Bosch Security Systems B.V.
5