Leica Biosystems ASP6025 - Manual (Page 10)

8 Instructions for Use V 2.2 RevI – 08/2013
1. Important Information
All information provided in these Instructions for Use applies only to the instrument type indicated on the cover page.
A nameplate indicating the instrument serial number is attached to the rear side of the instrument.
The Leica ASP6025 is available in two voltage variants, 120 V and 230 V.
Fig. 1
1.3 Qualification of personnel
Nameplate
for
voltage
variant 230 V.
Nameplate
for
voltage
variant 120 V.
Fig. 1 is provided as an example only
and shows a valid nameplate for this
instrument with the necessary infor-
mation about instrument type and
power requirement. The precise data
for the various versions is specified in
Chapter 3.2 "Technical data" .
1.2 Instrument type
• The Leica ASP6025 may be operated by trained laboratory personnel only.
• All laboratory personnel designated to operate this instrument must read these Instructions for Use carefully and must
be familiar with all technical features of the instrument before attempting to operate it.