Leica Biosystems ASP6025 - Manual (Page 103)

101 Leica ASP6025
• Otherwise, switch to the SETTINGS menu and press the REAGENT STATUS button there.
• Highlight the newly added reagent in the table (
Fig. 1 40).
• Press SET AS FULL to mark the station status as "full".
Fig. 140
Use the SMART FUNCTIONS menu to remote-fill the respective
system bottle from an external station,
or
fill the system bottle manually.
After filling a bottle manually the bottle must be defined as full.
Adding new reagents to stations
• To do this, open the REAGENT STATUS
window; this can be done directly by press-
ing the REAGENT STATUS button on the
SMART SCREEN.

The reagent status
(continued)
5. Operation

If the RMS has been activated, all threshold values for the newly filled reagent
are automatically reset to "0".