Operation – Leica Biosystems ASP6025 User Manual
Page 94
92
Instructions for Use V 2.2 RevI – 08/2013
5. Operation
• The stirrer can be started and stopped again.
When the button is colored orange, the stirrer is working
(
Fig. 125
).
Stop Stirrer
Start Stirrer
The Smart Screen
(continued)
Additional functions on the SMART SCREEN
• The retort temperature can be set on the Smart Screen. To
do this, press the SET TEMPERATURE button and call up
the SELECT THE RETORT TEMPERATURE entry window
(
Fig. 126
).
The temperature of the retort can be entered here.
The possible temperature range is from 35 - 65 °C. If
AMBIENT is selected, the retort is set to room temperature.
Fig. 126
Fig. 127
• A pressure cycle type can be selected. To do this, press the
SET PRESSURE button and call up the SELECT THE CYCLE
TYPE entry window (
Fig. 127
).
Then highlight one of the four cycle types (Pressure/Vacuum)
and press OK to confirm.
Fig. 125