Leica Biosystems ASP6025 - Manual (Page 35)

33 Leica ASP6025
4. Instrument Setup
100
Fig. 15
Fig. 16
• Now, fasten the monitor to the bracket by screwing the
screws back into the original threaded bore holes (108) on
the rear side.
• Tighten the screws (100) evenly but not too tightly using
the size 3 Allen key (104) supplied ( Fig. 16 ).
• Finally, remove the molded foam cushion (98) by lifting it
off the monitor.
101
103
104
101
Unpacking the instrument
(continued)
Installing the monitor
• To do so, lift the monitor out of the foam cushion and insert
it with the notch (103) on the rear side into the matching
bracket (101) (
Fig. 15 ) and hold it securely in this position.
• Now remove the screws (100) and washers from the plastic
bag. These screws are used to fasten the monitor to the
bracket (101).