Leica Biosystems ASP6025 - Manual (Page 34)

32 Instructions for Use V 2.2 RevI – 08/2013
4. Initial Operation
Unpacking the instrument
(continued)
Installing the monitor
• The monitor (5) is wrapped in a plastic dust cover (109) and
is placed with the screen facing downwards in a molded foam
cushion (98) next to the retort (
Fig. 12 ).
107
107
Fig. 12
109
Fig. 14
98
102
5 108
• First, take out the two foam parts (107) next to the bracket
( Fig. 12 ). Then you remove the dust cover.
• Before the monitored is screwed to the bracket, you should
check that the three terminals (102) (power supply, USB port
and monitor cable) on the bottom of the monitor are fas-
tened correctly (
Fig. 14 ).
• A small plastic bag is fastened to the rear side of the bracket
(101), which contains four screws with compatible washers
(100) (and a size 3 Allen key (104)) (
Fig. 13 ).
100
101
Fig. 13
98
104
5