Leica Biosystems ASP6025 - Manual (Page 114)

112 Instructions for Use V 2.2 RevI – 08/2013
Editing program steps
(continued)
Setting a delay step
The delay step is the step that is prolonged to ensure that a program will finish at a specified time.
• Highlight the program step you wish to define as delay step.
• Touch the DELAY button.
The delay symbol is moved to the selected step, thus defining the step as delay step.
Copying program steps
• Highlight the step you wish to copy.
• Press the COPY button to copy the highlighted step.
• If required, modify properties of the step.
• Use the MOVE UP / MOVE DOWN buttons to move program steps up or down within an exist-
ing program without having to recreate those steps.
Deleting program steps
To delete a step from a program:
• Highlight the step you wish to delete.
• Press the DELETE button.
5. Operation
It is not possible to delete a step from a program consisting of only one step.
Programs must consist of at least one step.
Remember that a program step cannot be copied if the program already
contains the maximum number of 15 steps.
A delay step is permitted in fixing, intermedium or paraffin. The DELAY button
is disabled for other reagents.