Leica Biosystems ASP6025 - Manual (Page 66)

64 Instructions for Use V 2.2 RevI – 08/2013
5.1 System configuration - configuring the instrument parameters
From the start screen, press
ENHANCEMENT on the right-hand side
to go to the window of the same name.
In the ENHANCEMENT window (
Fig. 71 ),
first select the
INSTALLATION button and move to
the window of the same name. The
ENHANCEMENT button is enabled in
supervisor mode only.
This menu displays the parameters for
the ASP6025 which are to be configured
during installation.
Fig. 71


5.1.1 The Installation menu
The serial number of the instrument and
the current software version are entered at
the factory and cannot be edited.
The serial number can be found on the
rating plate of the instrument and on the
console for the USB connection. It is used
on the printed logs in the same way as the
instrument name.
Fig. 72
5. Operation