Lenze EtherCAT Controller-based Automation - Manual (Page 109)

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
109
8 Mixed operation - EtherCAT with other bus systems
8.3 EtherCAT and PROFINET
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.3 EtherCAT and PROFINET
[8-3] Example: Mixed operation of PROFINET with EtherCAT on the Lenze Controller 3221 C

Note!
• In the Lenze automation system, no PROFINET master functionality is supported. In a
PROFINET network, a Lenze Controller can only be driven as I/O device (slave), e.g. by
a Siemens SIMATIC S7 PLC.
• In the Lenze automation system, Logic field devices can be exclusively operated via
PROFINET. Thus, as an I/O device, the Lenze Controller is a Logic field device.
• The Motion functionality is not supported when PROFINET is used. Always use
EtherCAT to connect inverters to be controlled via the central motion functionality.

Communication manual Controller-based Automation PROFINET
Here you can find information on how to commission PROFINET components.