Lenze EtherCAT Controller-based Automation - Manual (Page 64)

7 Commissioning of the system
7.3 Detailed description of the commissioning steps
64
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11. Under "Properties", select the reference of the function block with which the visualisation
is to be connected (in the example "MC_Test_i700").
12. Confirm your selection by clicking the OK button.
13. Translate the PLC program code.
Menu command Build Build or <F11> function key
14. Store the »PLC Designer« project in the project folder.
Menu command File  Save project / Save project as ...