Lenze EtherCAT Controller-based Automation - Manual (Page 50)

7 Commissioning of the system
7.3 Detailed description of the commissioning steps
50
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
B. Upload the parameters currently set in a Servo-Inverter i700 to the Engineering PC and store
them there:
• Select a Servo-Inverter i700 in the device list
• With the
button or the <F7> function key, upload the parameter set of the servo inverter.
(The parameter set of the servo inverter is transferred directly to »EASY Starter« without the
parameter set being stored on the controller.)
• With the Save button, store the parameter as a GDC file on the Engineering PC.